Angelcare AC420 Manuel du propriétaire télécharger pdf (Page 5)

ICONS ON YOUR ANGELCARE

MONITOR

ICON MEANING FUNCTION AND USE

PARENTS UNIT

Power

Press and hold to turn ON or OFF.

Channel key (8 channels)

Press to enter or exit the Channel Selection Mode.

Push the channel button on the parents unit. The “--” symbol will appear along

with the In Range icon which will flash. Press the channel selector (top button)

on the nursery unit until the night light halo flashes. Select the channel by

gently pushing on the top button on the nursery unit (you will see the channel

changing on the parents unit). Once the channel is selected, press and hold the

nursery unit top button to confirm selection (halo will stop flashing).

Both units are always on the same channel.

If the interference persists, consult the Troubleshooting section.

Temporary mute key

Press to mute the speaker. parents unit will not receive sound for 2 minutes.

Press again to reactivate the sound before the 2 minutes are up, if desired.

Up and down

sound volume

Increases or decreases volume on the parents unit

PARENTS UNIT’S SCREEN DISPLAY

Nursery unit

When this icon appear, batteries need to be replaced in the nursery unit.

Parents unit

This icon will be ON only during Channel Selection Mode.

Sound

This icon indicates that the sound transmission is activated. It will flash when

in Temporary Mute Mode.

Battery level

When this icon is clear, the batteries in the parents unit are low, and the parents

unit needs to be placed on the charger. When icon is clear and flashes, and the

nursery unit icon appears, the nursery unit batteries needs to be replaced. When

the batteries are TOO LOW, a “beep” will be heard every 15 seconds . The low

battery warning will continue for 30 minutes before the unit shuts itself OFF.

Sound level indicator

Displays the sound level on the parents unit. There are 5 sound levels. Once

you've chosen the desired level with the Up and Down keys, the bars will disap-

pear and will start moving according to the sound transmitted by the nursery unit.

The sound level indicator bars allow you to see the level of sound in your baby’s

room. The louder the sounds from baby, the more bars appear.

Channel and Baby’s room

temperature display

When turning ON the parents unit then the nursery unit, the channel number

will be displayed on the parents unit screen for about one minute. It will then

be replaced by the nursery room temperature display (in Celsius).

Note: If the nursery unit is ON before the parents unit, or if the Parent Unit is OFF

and then turned ON while nursery unit is ON, the temperature display will

indicate the channel number until there is a change of temperature.

In Range icon

1) This icon will start flashing on the parents unit when the distance between the

units is over the maximum range. A beep will also be heard. To activate this

function, slide the right wing switch up. This option informs you when the dis-

tance between the nursery unit and the parents unit is over the maximum range

of transmission.To deactivate the In Range function, slide the right wing down.

NOTE: Range: up to 250 meters/ 820 ft (open field); between 80 meters/ 262 ft and

100 meters/328 ft (indoors).

2) This icon will also flash with the channel number on the parents unit screen

when in channel selection mode.

1 2 3 4 5 6 7 8 9 10 ... 21 22

Commentaires sur ces manuels

Pas de commentaire

Angelcare AC420 Manuel du propriétaire Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs vidéo pour bébés Angelcare AC420